Using an Elizabethtown Area School District Projector

INSTRUCTIONS

Set up the Projector, Computer and Speakers:

• Plug the power strip in to the extension cord and the extension cord into a power outlet in the wall.
• Connect the projector’s power cable to the projector and plug in to the power strip.
• Connect the computer’s power cable to the computer and plug in to the power strip.
• Turn on both the projector and the computer.
• Connect the external speakers to the headphone port on the computer and plug them into the power strip.

 Connect the HDMI cable:

• Locate the HDMI port on both the computer and the projector.
• Connect the ends of the HDMI cable to the HDMI ports in the projector and the computer.
• Cycle through the projector’s Source menu until it lands on HDMI and the computer display appears through the projector.

Configure Display Settings:

• Use the Focus ring or slider on the projector to sharpen the image.
• Move the projector or adjust the Zoom to correct the screen size and positioning.

Troubleshooting:

• Check HDMI cables are seated securely.
• Select the correct HDMI source (HDMI 1 to HDMI 3).
• Restart the computer and/or projector.
• Confirm that the computer’s Sound settings are set to external speakers.